If your air conditioner entirely malfunctions, there’s clearly a serious problem that requires the attention of an expert AC contractor. The situation when your air conditioner is operating but the air isn’t chilly enough or isn’t blowing enough cold air is a little trickier to solve. It can be annoying if your air conditioner isn’t providing adequate cooling for your house. For this reason, we provide both big and small problem fixes, so you can always feel at ease in your house or place of business!
Why my ac is not cooling
1. Clogged air filter
Split ac not cooling but fan is running
Filters that are dirty or unclean are the main source of issues with air conditioners. When the air conditioner is used frequently, dust and debris accumulate on the external unit and obstruct the flow of cool air via the filter. Numerous problems, such as malfunctioning and ineffective thermostat operation, could result from this. Moreover, the dirt could freeze the evaporator coil, preventing cool air from the outlet from entering your room.
Solution:-
One of the easiest and most effective ways to solve this issue is to regularly clean the filters. Cleaning the filters every two to three months is advised. The following guidelines should be followed if you have never cleaned a filter before:
- The first step is switching off the AC and disconnecting the wires.
- Open the AC panel and remove the air filter.
- Clean the air filter using a soft toothbrush and water.
- After removing the dust, clean the filter using a wet cloth or by washing it under tap water.
- After removing all the dust. Let the filters dry completely before you put them back.
2. Grimy condenser coil
Why my ac is not cooling even after cleaning
Another major reason is an unclean condenser coil. Instead of cooling air, heat from the refrigerant is released by the exterior condenser coil. Debris, such as leaves or dirt can obstruct the coil’s ability to transfer heat, making the air conditioner work harder. The overall performance of the condenser coil can be significantly enhanced by cleaning and debris removal.
3. Low refrigerant level
AC not cooling enough on hot days
In simple terms, the refrigerant in an air conditioner plays a crucial role in cooling the air. It absorbs heat from the indoor air, helping to lower the temperature. If there is a leak or the refrigerant level decreases naturally over time, the air conditioner’s ability to cool effectively will be low. If you notice a drop in cooling performance or suspect a leak, it is important to contact a qualified technician for repairs.
4. Frozen evaporator coil
AC not cooling after gas refill
Less common, but still possible, is a frozen evaporator coil .The inner coil, responsible for cooling the air, can frizzy if the AC runs too cold or if the airflow is blocked. This prevents the coil from absorbing heat from warm air, reducing cooling effectiveness. To thaw a firmed coil, turn off the AC fully and switch the fan to on to circulate air. However, consult a good technician. If the ice does not melt within many hours or the problem persists.
5. Compressor failure
Why my new ac is not cooling
The compressor is a important component of AC that circulates refrigerant throughout the system. If it malfunctions, it disrupts the entire cooling process. If your AC isn’t turning on at all or keeps tripping the breaker, you will require a technician’s examination and repair to handle compressor troubles.
Conclusion
In conclusion, there can be many problem causing less cooling to your AC. I have mentioned some of them in this blog with there solutions, like dirty air filters and grimy condenser coils. Here are some more reasons that can also effect your AC cooling, like Thermostat malfunction, Undersized AC unit, Old system, Broken Capacitor. I hope you found this blog useful, informational and i try my best to make you relief from this extreme summer.
